IceFree Valley Panel

The system designed to be installed on the valley of the roof. The system is designed to eliminate ice and snow, keeping your home safer and reducing the risk of winter damage. This panel is approx 3″ wide and is guaranteed to heat the entire length of the panel. The valley panel can be custom built to fit the length of your roof’s valley.

The IceFree Valley Panel is designed to work with either 11mm or 14mm commercial grade self regulating heat cables.

Specifications

Material Selection :- Aluminum Alloy 6063, Temper – T5

Color :- Decorative Cladding

Panel Size :-  3″ x 5′ – Designed to eliminate icicles and ice dams in roof valley and areas where a drain path is needed.

Heating Systems :- Commercial Grade-Self Regulating Heat Cable (min. 5 Watt per foot in 100-130 VAC or 208-240 VAC). Valley Panels require 2 feet of Heat Cable per foot of panel. Designed for 11mm or 14 mm heat cables.

Components :- The IceFree Valley Panel Includes: Aluminum Alloy Snap Loc Top, Aluminum Alloy Base Panel

Optional Items :- Ambient and/or Moisture Sensor Controllers.  Self regulating heat cable for gutters and downspouts.

Electrical Requirements :- N.E.C. 426-28 requires 30mA Ground Fault circuit protection for snow and ice melting applications.

Decorative Cladding Color Options

IceFree Valley Panels are available with a decorative metal cladding. The decorative metal cladding provides a cost effective, attractive finish that will complement the look of your home. The Kynar 500 or Hylar 5000 cladding carries a 30-year warranty.

Compatible Heating Cables

IceFree Panels have two sets of heat channels for both 11mm and 14mm heat cables:

• Commercial Grade-Self Regulating Heat Cable (in 100-130 VAC or 208-277 VAC).
• Requires 2 feet of Heat Trace cable per foot of panel.
• Designed for 11mm or 14 mm heat cables.

Electrical and Environmental Requirements

Article 426-28 of the N.E.C. requires 30 mA Ground Fault circuit protection for snow and ice melting applications.